Move Cruise Switch from Steering Wheel to Toggle
Printed From: the12volt.comForum Name: Cruise Controls
Forum Discription: Cruise Control Settings, Tach Signal, VSS PPM(Vehicle Speed Signal Pulses Per Mile), Vacuum, Brake, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=140990
Printed Date: April 26, 2024 at 10:37 AM
Topic: Move Cruise Switch from Steering Wheel to Toggle
Posted By: metal_mulisha
Subject: Move Cruise Switch from Steering Wheel to Toggle
Date Posted: March 09, 2016 at 12:21 PM
As the title says, I want to move my cruise control switch from my steering wheel to a pair of toggle switches. My car is a 2005 Subaru Impreza, which I am installing an aftermarket wheel. I want to keep my cruise control tho. From the factory there is a small lever next to the wheel which is for cruise control like most newer cars have. I am unsure exactly how to do this. It should work with 2 momentary toggle switches. I attached a wiring diagram for reference. There are a total of 5 wires required to make this work. If anyone can help me on exactly what type of toggle switch I should use and exactly where to run each wire, that would be great!! Thanks!!
Replies:
Posted By: metal_mulisha
Date Posted: March 09, 2016 at 12:25 PM
Bottom have of image.
