Print Page | Close Window

2007 Chevy Cobalt OE cruise control

Printed From: the12volt.com
Forum Name: Cruise Controls
Forum Discription: Cruise Control Settings, Tach Signal, VSS PPM(Vehicle Speed Signal Pulses Per Mile), Vacuum, Brake, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=141169
Printed Date: March 28, 2024 at 8:44 AM


Topic: 2007 Chevy Cobalt OE cruise control

Posted By: jgerard81
Subject: 2007 Chevy Cobalt OE cruise control
Date Posted: April 15, 2016 at 8:27 AM

I am installing the OE cruise control switch in my 2007 Chevy Cobalt LS. Currently, I have all the wires connected from the clock spring to the BCM. The only issue I have is not being able to find any information about the wire harness that connects from the cruise control switch, to the other end of the clock spring. If someone could share a diagram of the harness that connects from the 5 pin connector on th OE cruise control swith to the 11 pin connector on the clock spring, I would truly appreciate it.



Replies:

Posted By: jgerard81
Date Posted: April 15, 2016 at 6:30 PM
I think I was able to find half the information I needed.

Pin 4 (Pink) of the cc switch to pin C of clock spring (SIR coil)
Pin 5 (Gray) of the cc switch to pin D of clock spring
Pin 7 (Blk/Wht) of the cc switch to pin K of clock spring

I am still unable to find anything related to which wires are for the Driver Information Controls. Also, if the pinout above is incorrect, please feel free to correct.
Thank you for taking the time to help.






Posted By: jgerard81
Date Posted: April 17, 2016 at 9:29 PM
I ended up just using the wire harness that came factory on my 2007 Cobalt LS. I added in a wire between pin 4 of the cc connector and pin C of the clock spring connector, and another wire between pin 5 of the cc connector and pin D of the clock spring connector. The other 3 wires just stayed where they were.
The hardest part of adding the OE cruise control to this car was convincing a GM dealership to enable it in the cars computer. Once they finally did it, it works great.





Print Page | Close Window