Audiovox to Rostra Cruise

Printed From: the12volt.com
Forum Name: Cruise Controls
Forum Discription: Cruise Control Settings, Tach Signal, VSS PPM(Vehicle Speed Signal Pulses Per Mile), Vacuum, Brake, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=141560
Printed Date: May 02, 2025 at 4:25 AM

Topic: Audiovox to Rostra Cruise

Posted By: timkins
Subject: Audiovox to Rostra Cruise
Date Posted: July 30, 2016 at 5:10 PM

I have a new Rostra Cruise that I purchased but it does not have the magnets for attaching to the drive shaft or the pick up that attaches to the body. I still have the old Audiovox cruise set up on my car. Can I just use the vacuum canister from the Rostra and all of the wiring and parts from the Audiovox. They look the same all the way down to the switches on the vacuum canister.

Replies:

Posted By: the12volt
Date Posted: July 31, 2016 at 7:38 AM

Yes, the Audiovox cruise control is made by Rostra. The servo switches are the same.

-------------
posted_image

the12volt • Support the12volt.com

Print Page | Close Window