Are any shops installing cruise controls?
Printed From: the12volt.com
Forum Name: Cruise Controls
Forum Discription: Cruise Control Settings, Tach Signal, VSS PPM(Vehicle Speed Signal Pulses Per Mile), Vacuum, Brake, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=143526
Printed Date: April 20, 2024 at 3:13 AM
Topic: Are any shops installing cruise controls?
Posted By: i am an idiot
Subject: Are any shops installing cruise controls?
Date Posted: September 06, 2017 at 8:43 AM
None of the shops in my area are doing them. If somebody out there is doing them for dealerships or end users, how many units a month are you doing? What is the Going rate for a 2017 Chevy Cruze with a Rostra unit?
Replies:
Posted By: mo12v
Date Posted: January 08, 2018 at 10:45 AM
I see this was posted September 06, 2017 ........day late & dollar short
Did you still need help with a few stats?
I am in Missouri & have been with Rostra since day one.......
-------------
MO
Don't Learn from Others Mistakes
You Might Be the One That Knows.
Posted By: i am an idiot
Date Posted: January 08, 2018 at 11:02 AM
We do buy products from Rostra. We in the past did our fair share of them. We still do a few for the local GM Dealership. That day I had called all of the other shops in the area and was surprised to learn nobody else would even consider doing one. I was just curious.
Posted By: shark mobile
Date Posted: January 22, 2018 at 5:43 PM
New cruise controls are easy and provide large profit margins for me. An average vehicle I charge 550.00 and the install is usually under an hour. Granted they are becoming fewer and fewer vehicles without cruise but work trucks tend to be the bulk of my installs. It’s just a nice added feature to my business. :)
-------------
Solder, tape, repeat!
|