Print Page | Close Window

2001 Hyundai Accent Aftermarket

Printed From: the12volt.com
Forum Name: Cruise Controls
Forum Discription: Cruise Control Settings, Tach Signal, VSS PPM(Vehicle Speed Signal Pulses Per Mile), Vacuum, Brake, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=15414
Printed Date: May 12, 2025 at 8:25 PM


Topic: 2001 Hyundai Accent Aftermarket

Posted By: drytoast
Subject: 2001 Hyundai Accent Aftermarket
Date Posted: June 25, 2003 at 12:27 AM

I am trying to install an aftermarket cruise control with a vacuum servo

into a 2001 Accent (1.6).  I think I have most of it but I can't find any vacuum

sources off the intake other than the one to the brake booster and I don't

particularly want to T into that one.  :V:

Any ideas? Thanks.




Replies:

Posted By: CruiseCoast
Date Posted: July 20, 2003 at 10:41 AM
You might want to consider doing an electronic cruise. We did vacuum cruises for years, and made the swith to all electronic units about three years ago. I think you will be happier with an electronic unit. as far as trying to tap into that vacuum , there should be a vacuum line coming off of the throttle body, or the intake runner. Good luck!

-------------
Douglas Walker
SellersAuto Air & Cruise
Gulfport, Ms

Do it right do it once!



Posted By: airandsound
Date Posted: August 02, 2003 at 10:45 AM
electric servo cruise from SCS/Frigette

i have seen some use the power brake hose, just make it secure.


Print Page | Close Window