clutch switch or?

Printed From: the12volt.com
Forum Name: Cruise Controls
Forum Discription: Cruise Control Settings, Tach Signal, VSS PPM(Vehicle Speed Signal Pulses Per Mile), Vacuum, Brake, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=19170
Printed Date: May 14, 2025 at 1:33 AM

Topic: clutch switch or?

Posted By: zargon
Subject: clutch switch or?
Date Posted: September 22, 2003 at 4:45 PM

when you are doing cruise on manual tranmissions are you using the clutch switch or the over rev protection on the unit??

-------------
zargon ruler of estranorth

Replies:

Posted By: NowYaKnow
Date Posted: September 22, 2003 at 6:10 PM

Hey. Usually I just hook up the tach wire which is all there is for over rev protection on the unit. I know some people will do manuals with neither and technically the owner should have more of a clue so you shouldn't need it. So at the least I hook up the tach wire..

Print Page | Close Window