1990 Acura legend cruise control
Printed From: the12volt.com
Forum Name: Cruise Controls
Forum Discription: Cruise Control Settings, Tach Signal, VSS PPM(Vehicle Speed Signal Pulses Per Mile), Vacuum, Brake, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=21223
Printed Date: May 07, 2024 at 11:35 PM
Topic: 1990 Acura legend cruise control
Posted By: maclamb
Subject: 1990 Acura legend cruise control
Date Posted: November 09, 2003 at 8:51 PM
Hi,
I'm new to this forum. I just purchased a 1990 Acura legend. It's cruise control system will "turn on" - but will not engage when I prtess the set button on the steering wheel control. I have checked the fuse and it is OK
Any ideas where to start testing?
thanks
-------------
You are not your car
Replies:
Posted By: Geeque
Date Posted: December 17, 2003 at 12:59 PM
Check to make sure the Mechanical side of cruise is operating normally, Its located next to throttle cable. Start there and let me know?!?
-------------
Gary Kline
MECP Master Technician
Posted By: softail
Date Posted: December 28, 2003 at 10:42 PM
actually i have the same problem on my 1990 acura integra the switch lites up , i tested the criuse control actuator and it works fine i've tested the switches im my steering wheel and still nothing any help would be appreciated thanks
Posted By: Geeque
Date Posted: January 03, 2004 at 10:19 AM
Check the connection at the transmission for a faulty vss solenoid or try checking vacuum lines for air leaks.
-------------
Gary Kline
MECP Master Technician
|