Reving Engine

Printed From: the12volt.com
Forum Name: Cruise Controls
Forum Discription: Cruise Control Settings, Tach Signal, VSS PPM(Vehicle Speed Signal Pulses Per Mile), Vacuum, Brake, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=40616
Printed Date: May 09, 2024 at 12:04 PM

Topic: Reving Engine

Posted By: PONYKILLER87
Subject: Reving Engine
Date Posted: October 10, 2004 at 1:27 AM

Im trying to figure out if it is possible to use the cruise control to rev the engine up. What I want to beable to do is use the accessory button on my alarm to active a simple circuit of some kind that would rev the engine up for a second or two (3000 rpm) after using the auto start. This my sound really dumb to some people but my truck has some loud pipes on it and I like showing them off. Im doing this on a 96 chevy K1500 pickup. It has the 5.0 vortec engine. I think if I had a diagram of the cruise control module I could figure it out, but pretty much any help would be good.

Thanks

Kevin

Replies:

Posted By: zargon
Date Posted: October 11, 2004 at 4:21 PM

your not going to be able todo it with a standard cruise control, maybe a small actuator hooked to a timer modual, im sure it can be done, but i dought you can use a cruise control

-------------
zargon ruler of estranorth

Posted By: mo12v
Date Posted: October 11, 2004 at 10:45 PM

It can be done but U will have to configure a relay with a unit that would pulse the Servo wire that accuates the throttle. I have done that on Rostra and AR Cruise controls, but not on Factory Cruise control units.......With a little messing around, & if U know how a cruise servo works It can be done

-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Posted By: PONYKILLER87
Date Posted: October 11, 2004 at 10:51 PM

mo,

thats what I figured, just need a wiring diagram for the stock cruise system so I know which wire needs to be powered up. I talked to the guy at the dealership and he thinks he can get it for me. Thanks.