Print Page | Close Window

adding Cruise control. How hard how $ ?

Printed From: the12volt.com
Forum Name: Cruise Controls
Forum Discription: Cruise Control Settings, Tach Signal, VSS PPM(Vehicle Speed Signal Pulses Per Mile), Vacuum, Brake, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=45667
Printed Date: May 11, 2025 at 6:44 PM


Topic: adding Cruise control. How hard how $ ?

Posted By: quick4321
Subject: adding Cruise control. How hard how $ ?
Date Posted: December 21, 2004 at 2:17 AM

I have a 1998 Chevy Prizm I bought to use as my commuter car. It is a bottom of the line car. No power anything, but it gets better gas milage than my expedition. :). Can someone point me in the right direction, and let me know how much is involved in addign crusie control? Thanks.

P.S. just link me to a FAQ if one is already made, and accept my applogies for missing it.



-------------
Clarion DRX9255
Dynaudio MD130, MD140/2, MD160, MD170
(4) ID V3. 12" Dual 2ohm IB setup
EPX2 Symmetry w/ zapco line drivers
Monior 1 amps (2)MK2.120, MK4.70
Hifonics Colosus VII 1600x1



Replies:

Posted By: quick4321
Date Posted: December 21, 2004 at 2:25 AM

ok, iI found the faq on crusie control. Not sure how I missed the hugh section but anyway. So should I buy the factory cruise control arm and factory module, or is it best I buy some aftermarket parts and do the install that way?

Thanks.



-------------
Clarion DRX9255
Dynaudio MD130, MD140/2, MD160, MD170
(4) ID V3. 12" Dual 2ohm IB setup
EPX2 Symmetry w/ zapco line drivers
Monior 1 amps (2)MK2.120, MK4.70
Hifonics Colosus VII 1600x1


Print Page | Close Window