Print Page | Close Window

Tractor "cruise control"

Printed From: the12volt.com
Forum Name: Cruise Controls
Forum Discription: Cruise Control Settings, Tach Signal, VSS PPM(Vehicle Speed Signal Pulses Per Mile), Vacuum, Brake, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=5057
Printed Date: May 04, 2025 at 2:29 AM


Topic: Tractor "cruise control"

Posted By: harold1956
Subject: Tractor "cruise control"
Date Posted: November 02, 2002 at 7:26 PM

I have installed a '91 chevy smallblock in my Allis Chalmers tractor. and now need an engine governor. I figure I could hook up a generic cruise control that monitors the engine speed (not the driveshaft) to pulse the cruise unit and control engine rpm. Hooking up a magnet pulser to the flywheel seems a simple solution. Any guidence would be appreciated.i

-------------
HS



Replies:

Posted By: PLAYER69
Date Posted: November 18, 2002 at 5:32 PM
A mechanical throttle lock would likely be the best solution. 


Print Page | Close Window