ford diesel pu truck cruise control

Printed From: the12volt.com
Forum Name: Cruise Controls
Forum Discription: Cruise Control Settings, Tach Signal, VSS PPM(Vehicle Speed Signal Pulses Per Mile), Vacuum, Brake, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=6525
Printed Date: May 05, 2025 at 3:04 PM

Topic: ford diesel pu truck cruise control

Posted By: rjones1580
Subject: ford diesel pu truck cruise control
Date Posted: December 11, 2002 at 10:18 AM

I have a 2002 F350 diesel pickup truck. Is there an after market cruise control available for this truck/engine?

-------------
Dick Jones

Replies:

Posted By: pork n beans
Date Posted: December 14, 2002 at 9:26 PM

there are none as far as i know. you have an electronic gas pedal. there is no physical linkage to the throttle body. therefore there is no way to hook a mechanical cruise the vehicle. i have heard that ford makes one. you can buy it from parts i believe

-------------
you have a choice

Posted By: Peter6218
Date Posted: January 08, 2003 at 10:25 AM

I've got an ancient cruise control insalled on a 1984 Ford F250 Diesel. It was working fine and then it quit.

Apparently the magnet has come off the driveshaft.

Does anyone know where I can buy a magnet ??

Peter

Posted By: DanDan
Date Posted: January 17, 2003 at 9:22 PM

You can buy the cruise for that diesel directly from Ford. It takes about 10 minutes to install. It uses no servo. You can call parts at Delray Lincoln Mercury in Delray Beach, Fl. Ask for parts and they will help you. They have the largest Wholesale Ford parts division in the country. Phone number is 561-276-2411. I know they have an 800 number but I do not have it. It is very inexspensive and it's factory. Ford pretty much has an application for all there vehicles. Thats all I use when I get a Ford to put a cruise in.

DanDan