Print Page | Close Window

2006 Chevy Cobalt Cruise

Printed From: the12volt.com
Forum Name: Cruise Controls
Forum Discription: Cruise Control Settings, Tach Signal, VSS PPM(Vehicle Speed Signal Pulses Per Mile), Vacuum, Brake, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=77919
Printed Date: May 03, 2025 at 6:18 PM


Topic: 2006 Chevy Cobalt Cruise

Posted By: blueextc
Subject: 2006 Chevy Cobalt Cruise
Date Posted: May 17, 2006 at 11:34 AM

Looking for suggestions/wiring help to install a cruise control in my 2006 Cobalt.

I have heard praises about the 250-1775 Rostra, but also later models being locked out for programming.

If there is a sticky someone could post, or specific directions somewhere i would appreciate it.

Thanks




Replies:

Posted By: Velocity Motors
Date Posted: July 09, 2006 at 3:06 PM
The Fortin system requires a GM scan tool after installation. This will be an added cost to you unless you know someone with a can tool. Just a FYI to you .

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA



Posted By: 12voltmaster
Date Posted: July 10, 2006 at 11:29 AM
Yes you need SCAN TOOL but on market there have noting for aftermarket cruise inside this vehicule, and you do not need to reprogram the vehicule with de Dealer SCAN TOOL, you need SCAN TOOL to turn ON factory cruise control, Is 2 minutes job ....


Print Page | Close Window