Print Page | Close Window

96 Nissan Hardbody VSS Location, CCS-100

Printed From: the12volt.com
Forum Name: Cruise Controls
Forum Discription: Cruise Control Settings, Tach Signal, VSS PPM(Vehicle Speed Signal Pulses Per Mile), Vacuum, Brake, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=77959
Printed Date: May 07, 2025 at 2:22 AM


Topic: 96 Nissan Hardbody VSS Location, CCS-100

Posted By: 96hardbody
Subject: 96 Nissan Hardbody VSS Location, CCS-100
Date Posted: May 18, 2006 at 2:05 AM

Hey guys, I have a 96 Nissan truck (xe, king cab, manual trans) I have scoured the internet trying to find the right vss wire to hook to. I have a Haynes and have access to Mitchell on Demand, so I've looked at all of the wiring diagrams. My question is, which wire is the RIGHT vss wire for the cruise control?? I've tried different ones, and ultimately melted the ground to my ccs-100. None of the wire colors matched up with the wiring diagrams, so I went by what was printed on the wires themselves...and there was more than just one with vss on it, lol. If someone would be a kind soul, and help me out so I don't do the same thing again when I get a new unit. ANY help or advice is much appreciated. Thanks.

Ohhh, and I have not purchased a new cruise control unit, so I am open to suggestions from everyone's experience........




Replies:

Posted By: mo12v
Date Posted: May 18, 2006 at 10:09 PM

Lower left of multi-junction connector..... 3rd position
VSS Wire Color: WHITE/ Blue



-------------
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.


Print Page | Close Window