Print Page | Close Window

GM Throttle Adapter?

Printed From: the12volt.com
Forum Name: Cruise Controls
Forum Discription: Cruise Control Settings, Tach Signal, VSS PPM(Vehicle Speed Signal Pulses Per Mile), Vacuum, Brake, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=8051
Printed Date: May 05, 2025 at 7:50 PM


Topic: GM Throttle Adapter?

Posted By: NowYaKnow
Subject: GM Throttle Adapter?
Date Posted: January 12, 2003 at 8:39 PM

Hey..Lately I've run into a problem when installing cruises..It seems the plastic connector that snaps on most throttle bodies is just a little too big for certain GM throttle bodies..It seems to snap on like normal but then just falls off when it moves. I talked to some other guys and they said they just put a wire tie around the connector to help hold it on..I was looking for something a little more reliable..Anybody know if they make any adapters for these slightly smaller ones? Thanks for any info.




Replies:

Posted By: the12volt
Date Posted: February 02, 2003 at 12:16 PM
If the adapter is too small to hold it on place, thread a nut on the cable, then run it through a piece of cheese strap that you can screw near the opening on the bracket, then thread another nut on the cable to secure it in place. 


Print Page | Close Window