gm cruise control 84 s15 blazer

Printed From: the12volt.com
Forum Name: Cruise Controls
Forum Discription: Cruise Control Settings, Tach Signal, VSS PPM(Vehicle Speed Signal Pulses Per Mile), Vacuum, Brake, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=8816
Printed Date: May 06, 2025 at 11:16 AM

Topic: gm cruise control 84 s15 blazer

Posted By: dan ballow
Subject: gm cruise control 84 s15 blazer
Date Posted: January 30, 2003 at 7:47 AM

I built a 48 ford streetrod using a GM column and wiring from an 84 S15 blazer. Also used the speedometer and cruise control hookups, cruise module and the servo. Pink/black wires are where they are supposed to be. I can't get it to work. Diagram I have shows a component other than the VSS and the Module with 2 wires, one from the VSS and one from the module. Does anyone know if I can eliminate that component and connect those 2 wires together? Any ideas?

-------------
dan ballow

Replies:

Posted By: the12volt
Date Posted: February 02, 2003 at 12:23 PM

You can use a speed signal generator in-line on the speedometer cable coming out of the transmission instead of trying to use the original VSS lead. If need be, you can use the GM lever with a Rostra cruise control to maintain the OEM look you have now. https://www.rostra.com/

Print Page | Close Window