New Gauges - No Cruise Control
Printed From: the12volt.com
Forum Name: Cruise Controls
Forum Discription: Cruise Control Settings, Tach Signal, VSS PPM(Vehicle Speed Signal Pulses Per Mile), Vacuum, Brake, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=8876
Printed Date: May 06, 2025 at 7:25 PM
Topic: New Gauges - No Cruise Control
Posted By: Geezer
Subject: New Gauges - No Cruise Control
Date Posted: January 31, 2003 at 10:34 AM
My speedometer on my 1990 GMC Vandura 2500 conversion van recently stopped working. I had the mechanic put in a new set of gauges from a Junk Yard 1990 GMC Vandura 2500. When he checked the original gauges he said the speed sensor was working ok so it had to be the gauges. The gauges now work but I lost my cruise control. I am not sure whether this is related to the gauge install or not but I checked the fuse for the Cruise Control and it is ok. Just where is the module located on this van and is there an electrical connection to the speedometer/gauges that may have been left un-connected which could affect the cruise control?
Replies:
Posted By: PLAYER69
Date Posted: January 31, 2003 at 11:33 AM
Do you know if it is an electric speedo for mechanical? For some reason I am thinking it is still a mechanical (cable) driven speedometer but I can;t remember. If it is mechanical, swap the pickup/buffer from the old speedo and put it on the new.
|