Toyota vacume tie in point?

Printed From: the12volt.com
Forum Name: Cruise Controls
Forum Discription: Cruise Control Settings, Tach Signal, VSS PPM(Vehicle Speed Signal Pulses Per Mile), Vacuum, Brake, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=9193
Printed Date: June 24, 2025 at 8:23 AM

Topic: Toyota vacume tie in point?

Posted By: mobileinstallat
Subject: Toyota vacume tie in point?
Date Posted: February 07, 2003 at 7:43 PM

2001 toyota corolla, installing an Audiovox CCS-100 (customer suplied) cruise controle.

all is fine but - need to know an easy tie in point for the vacume line?

any ideas would be appr!

Thanks in advance,

Mark

Replies:

Posted By: PLAYER69
Date Posted: February 10, 2003 at 9:51 PM

Look around the intake and see what you can find. Sorry I can't be of much help I don't remember any specifics on that car.

Posted By: Velocity Motors
Date Posted: February 11, 2003 at 6:40 AM

Ney Mark, you should be able to tie into the air intake box or the actual tubing. You can drill a hole into it and add a small male hose plug that you can run a vaccum hose to.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: mobileinstallat
Date Posted: February 11, 2003 at 8:27 AM

Jeff and Player -thank you

Mark

Print Page | Close Window