Print Page | Close Window

2006 montana sv6

Printed From: the12volt.com
Forum Name: Cruise Controls
Forum Discription: Cruise Control Settings, Tach Signal, VSS PPM(Vehicle Speed Signal Pulses Per Mile), Vacuum, Brake, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=92788
Printed Date: May 01, 2024 at 12:29 PM


Topic: 2006 montana sv6

Posted By: jmroussel
Subject: 2006 montana sv6
Date Posted: April 10, 2007 at 4:03 PM

Would any installer knows if Rostra has a cruise control for a 2006 Pontiac Montana SV6? I called their tech line three hours ago and they did not return my call yet. I think that their tech support need to be improved. They have a listing for the 2007 Chev Uplander (250-1774) but nothing on the Montana 2006. Any help would be appreciated so I could get back to my customer (local GMC Dealer) as soon as possible. While I was writing this memo, Rostra just called me back and said he never did a 06 Montana but if it got a 40 pin connector hanging under the knee pad, left of steering column, position 8 should be a gray wire for the  cruise (250-1774) to work. Does any installer ever try one of those before?

Thank-you



-------------
j-marc



Replies:

Posted By: jim hunter
Date Posted: June 01, 2007 at 5:10 PM
havent done a mini van , but sounds like his suggestion is like the saturn ion, used the wireless steering wheel control, hooked up power ground and 1 wire to that grey wire(which was in the kick on ion) and was done, f#*%$ing loved it, if only they were all this easy, and it appearsw the eqinox is same, my guess is vehicle is prepped for factory cruise and all we are doind is suppling a pulse on the factory wiring, but be aware ive heard of some gms, needing to have servicing go in with drb tool, and turn cruise on for you to get it to work





Print Page | Close Window