cruise control, 92 mx83 toyota cressida

Printed From: the12volt.com
Forum Name: Cruise Controls
Forum Discription: Cruise Control Settings, Tach Signal, VSS PPM(Vehicle Speed Signal Pulses Per Mile), Vacuum, Brake, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=98159
Printed Date: May 02, 2025 at 5:00 PM

Topic: cruise control, 92 mx83 toyota cressida

Posted By: shezza
Subject: cruise control, 92 mx83 toyota cressida
Date Posted: October 21, 2007 at 6:25 AM

Well, I disconnected some of the vacuum linesd to my cruise control and now it wont work. Any ideas?

Its a 92 Mx83 Toyota Cressida.

Thx

Replies:

Posted By: Velocity Motors
Date Posted: October 21, 2007 at 9:36 AM

Reconnect them. When you start your vehicle you should be able to hear if there's a line that did not get connected.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: shezza
Date Posted: October 21, 2007 at 9:53 AM

Hey Jeff,

Thx for the reply...
I connected them all back up and do not hear any leaks. Dont see any loose hoses. Something is out of whack :S

Posted By: Velocity Motors
Date Posted: October 21, 2007 at 10:10 AM

When you reconnected them, did you reconnect them to the same locations that they came off of ?

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: shezza
Date Posted: October 21, 2007 at 7:06 PM

Sure did... I know I disconnected and reconnected one at a time. Got me stumped! Is disconnecting the power from my battery for a few minutes maybe a way to go?

Print Page | Close Window