Wanted 998T Bit Writer

Printed From: the12volt.com
Forum Name: Buy and Sell Equipment
Forum Discription: All members may post and reply.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145992
Printed Date: April 26, 2024 at 12:34 PM

Topic: Wanted 998T Bit Writer

Posted By: itolond
Subject: Wanted 998T Bit Writer
Date Posted: February 02, 2020 at 1:23 AM

I am after a bitwriter to setup my alarm and reconfigure may alarm. the new series XK would be no use as I have not OBD in the vehicle. Mist that I see are out of stock - where to get even 2nd hand is ok

Replies:

Posted By: geepherder
Date Posted: February 02, 2020 at 5:55 AM

https://www.portarget.com/products/Directed-Electronics-%252d-Bitwriter.html

You should still be able to use an XK Loader3 if you want. It just uses the connector for power. You just need to put power to pin 16 and ground pin 4:

https://www.google.com/search?q=obd2+pinout&tbm=isch&source=univ&hl=en-US&sa=X&ved=2ahUKEwjolovO5rLnAhVEIqwKHaZYDeoQsAR6BAgKEAE&biw=1101&bih=1651&dpr=3

-------------
My ex once told me I have a perfect face for radio.

Posted By: itolond
Date Posted: February 02, 2020 at 6:45 AM

for the XK Loader3 don't I need a DEI account or similar?

Posted By: geepherder
Date Posted: February 02, 2020 at 6:55 AM

Not for just using the bitwriter functions. Other functions will be locked out.

Here's another bitwriter link:

https://www.drdetailshop.com/998T.htm

I have found that some of the older DEI alarms may not program with the XK Loader3, but will program with the bitwriter.

-------------
My ex once told me I have a perfect face for radio.

Print Page | Close Window