fleece, speaker rings securing

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=103067
Printed Date: May 14, 2025 at 5:37 PM

Topic: fleece, speaker rings securing

Posted By: rc26142
Subject: fleece, speaker rings securing
Date Posted: March 14, 2008 at 3:01 PM

Hello,

First Time making a fiberglass box, Already got the the skeleton done and the rings for the subs in the correct position. Ready to apply the fleece material over the whole project. Question i have is, the fleece over the speaker rings. do i need to secure it to the rings? if so any recommendations..This sounds confusing Any help would be apprecitive.

Thanks

Ron

Replies:

Posted By: malibudee
Date Posted: March 15, 2008 at 3:58 AM

Yes so that you can get a tight fit ... Just staple or glue the fleece to the inside of the speaker ring then hit it with the resin but you don't need to resin where the speaker goes just where the speaker ring and fleece meet so that is easier to cut out ..... hope that helps if not then just look around the forum help me out alot

Print Page | Close Window