custom paintball gun case build

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=103273
Printed Date: May 11, 2025 at 10:40 AM

Topic: custom paintball gun case build

Posted By: dirt_mister16
Subject: custom paintball gun case build
Date Posted: March 20, 2008 at 9:56 PM

ok im making a custom paintball gun case.

what i need to know is what do i need to do to keep the resin from distorting the foam when applying the fiberglass?

i do not want to make a mold, i want to make the foam and fiberglass one and the same when i am done.

if i need to explain more let me know i will do my best.

Replies:

Posted By: travis n
Date Posted: March 27, 2008 at 9:03 PM

what I did with my mold, if you do not have molding clay, and only foam, If i were you, use thin masking tape, and tape the whole thig, that way when ur done, you can un-stick the mold and have a perfect replica of the mold.

-------------
Trav

Posted By: philaf
Date Posted: April 05, 2008 at 1:12 PM

light spray adhesive and foil.. works for me every time. gotta go light on the spray though, cuz it can eat the styrofoam if sprayed striaght on..

-------------
sweetest system ever..

Print Page | Close Window