Print Page | Close Window

sub box covering styles?

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=103581
Printed Date: May 10, 2024 at 3:06 PM


Topic: sub box covering styles?

Posted By: rc26142
Subject: sub box covering styles?
Date Posted: April 01, 2008 at 1:36 AM

Hello Has any one used Rhino liner to cover a sub box If so how did it turn out?What do you recommend to cover sub boxes in?

Thanks Ron




Replies:

Posted By: jmelton86
Date Posted: April 01, 2008 at 2:41 AM
I have. Worked out pretty well.

-------------
2013 Kia Rio -90a alternator
DDX470HD GTO14001 GTO1014D (x3)
Big3 in 1/0G
1/0G to GTO14001



Posted By: joyrydn
Date Posted: April 02, 2008 at 8:36 PM
i personally havent, but i have seen it done it looks pretty good if that is the look you are going for.  i have seen leather, acrylic, fiberglass, diamond plate and pretty much any fabric as long as it is glue tight. but if you use a fabric that is really porous(sp) make sure you put a small bead of silicone and screw the sub in when it is wet, this will make a more difficult removal of the sub, but it will seal it tight.  note a small bead of silicone, you will just have to pull harder to remove the sub, srape out the silicone and reaplly before reinstalling the sub.

-------------
Make it Euro'n!!!


Print Page | Close Window