sealing a blow through enclosure
Printed From: the12volt.comForum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=105969
Printed Date: May 10, 2025 at 3:43 PM
Topic: sealing a blow through enclosure
Posted By: 94chevytruck
Subject: sealing a blow through enclosure
Date Posted: July 07, 2008 at 4:59 PM
Saw a topic about this but it was closed.
This is a good and relatively inexpensive way to seal the opening of a blow through enclosure for a sub box in the bed of a truck. its the same way one stereo shop wanted to charge me a couple hundred dollars to do. just be sure you buy quality materials and you should be good
-------------
If it aint broke...fix it till it is!
Replies:
Posted By: i am an idiot
Date Posted: July 07, 2008 at 7:01 PM