sanding epoxy resin

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=106069
Printed Date: May 15, 2025 at 6:30 AM

Topic: sanding epoxy resin

Posted By: krazykustoms
Subject: sanding epoxy resin
Date Posted: July 12, 2008 at 5:58 AM

Can someone tell me the best way to sand clear epoxy resin and still have that clear glass finish?

Replies:

Posted By: Velocity Motors
Date Posted: July 12, 2008 at 7:38 AM

You have to sand it with high grit paper and to get that glass finish you have to wet sand the epoxy. If you have sprayed the project with clear and it didn't lay down nicely, then the initial layer wasn't done properly. I'm assuming your doing carbon fiber ?

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: krazykustoms
Date Posted: July 13, 2008 at 7:37 AM

Yeah I'm doing carbon fiber and don't have a vacuum bagger so I'm trying to get the imperfections out of it. Thank you for the advice its greatly appreciate.

Print Page | Close Window