Print Page | Close Window

box materials?

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=107139
Printed Date: May 16, 2024 at 5:47 AM


Topic: box materials?

Posted By: jonesbones
Subject: box materials?
Date Posted: August 31, 2008 at 6:55 PM

I am on an extremely tight budget and i'm in the process of making a ported box for 2 subs...My grandpa works for a place called hubert fiberboad and they make medium and high density fiberboard and I can get it for free my grandpa says it has asphualt in it and people usually use it for insulation. My question is will this work for a box? It will still be 3/4 inch. He also says it will be hard getting it to stick together. Would glue and staples work?



Replies:

Posted By: i am an idiot
Date Posted: August 31, 2008 at 8:18 PM

MDF = Medium Density Fiberboard  

I have never heard of MDF being hard to stick together.  Staples and wood glue would be a good combination for the MDF we use.




Posted By: jonesbones
Date Posted: August 31, 2008 at 9:27 PM
Hey thanks...what do you think would happen if I used the high density with the asphault?



Posted By: megaman
Date Posted: August 31, 2008 at 9:29 PM
....but I've never heard of MDF having Asphalt in it, and NEVER heard of it being used for insulation. lol



Posted By: jonesbones
Date Posted: August 31, 2008 at 10:00 PM
Yeah me either thats why i'm asking if it will be okay lol...it's made for roof insulation.



Posted By: jayson33
Date Posted: September 03, 2008 at 10:59 PM

Asphalt in the trunk of a car on a hot summer day would probley ruin you trunk asphalt gets soft in the heat

also flex to much when it got soft I would think this may not be the best route to go even if it was free

FREE IS GOOD



-------------
My wife thinks bagging a truck means you kick it in the truck nuts


Print Page | Close Window