need vinyl

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=107373
Printed Date: May 12, 2025 at 3:52 PM

Topic: need vinyl

Posted By: mlw20lu
Subject: need vinyl
Date Posted: September 11, 2008 at 10:11 AM

what is the best way to wrap a box in vinyl.. Its somewhat contoured. im just wondering the best way to stretch. heating i know. pulling obviously. i was thinking of placing the material in the oven and getting it hot. any othe ideas or techniques that i could do?

Replies:

Posted By: no_joke_chevy
Date Posted: September 11, 2008 at 1:44 PM

all you real need to do is find out which way your vinyl stretches the most lay it that way over the longest part of your box and if you need to put a seam put it somewhere no one will see it. and if your using heatable vinyl just use a heat gun.

Print Page | Close Window