rotating screen problem
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=107565
Printed Date: May 02, 2024 at 7:37 PM
Topic: rotating screen problem
Posted By: ikethegoalie
Subject: rotating screen problem
Date Posted: September 20, 2008 at 8:21 AM
I am currently in the process of designing a screen mounted in a center console that when turned on will rotate out from behind a dead panel.
I am using a linear actuator to control the motion. My only problem is at certain points during the swing the motion gets very jerky and it kind of stutter steps until it reaches a point then smooths out again.
I am using two lazy susan bearings from woodcraft to handle the rotation. the arm for rotation is fixed to one side of the rotating assembly the other side just resides on the bearing.
any thoughts
Replies:
Posted By: still_walkin
Date Posted: September 20, 2008 at 9:52 AM
I would like to see some pics that sound nice wish I thought of it what's the stroke on the actuator
-------------
1993 sdv
Alpine 4x6 6x9 5 1/4 swr-10d4
alpine v60
12.5 VGA flip down
Nettop pc w/10" touch screen
78nova
5-re audio 5x7 ,10" sub &
Xtx-500.5
"Take the faceplate off get the jumperpack"
|