Print Page | Close Window

flush(hiding mounting points)

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=10772
Printed Date: August 20, 2025 at 6:45 AM


Topic: flush(hiding mounting points)

Posted By: crazedfiber
Subject: flush(hiding mounting points)
Date Posted: March 11, 2003 at 8:27 PM

i was wondering how when u mount an amp in an enclosure you hide the part of the amp where you put the screws in...ive seen them sit down in tubs and i wondered how? any advice??  



Replies:

Posted By: audiomechanic
Date Posted: March 23, 2003 at 11:13 AM
you can mount the amp from the underside, you can make a cover to hide all the parts you dont want to be seen. the most common way is to make a cover. this will give you the option to make the actual amp rack as strong and stable as you need and the cover makes it look how you want.

-------------


Print Page | Close Window