details on fiberglass box techniques
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=107796
Printed Date: May 10, 2024 at 11:12 AM
Topic: details on fiberglass box techniques
Posted By: trip7
Subject: details on fiberglass box techniques
Date Posted: September 29, 2008 at 1:28 PM
I have experience in the past with making fiberglass enclosures but now Im doing one a different way and have some questions about the details. if I glass the side of the car to get the shape do I have to make a wood frame that outlines the sides and top of the box or can I just glass the sides of the box and staple my fleece right to the sides without the wood framing/outlining
Replies:
Posted By: emptypockets426
Date Posted: September 30, 2008 at 8:53 PM
Its almost impossible to staple into fiberglass. Once you fiberglass the area where the box is going to go, pop out the mold, finish the lay up, trim the excess, mount the rings. Once you are ready to fleece, use 3m spray adhesive to apply fleece. that stuff is pretty strong. PM me if you have anymore questions.
|