door panels from scratch?
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=108622
Printed Date: April 26, 2024 at 9:18 AM
Topic: door panels from scratch?
Posted By: central99
Subject: door panels from scratch?
Date Posted: November 02, 2008 at 5:38 PM
Hey, i'm new to this forum and i was curious if anyone had ideas on how to make custom door panels from scratch. I recently bought a 1973 Ford Maverick 2-door and it doesn't have any door panels. The interior of the door itself is flat with just the window crank and door handle to work around. I would like to create a panel to enclose a 5-1/4" or 6-1/2" speaker. If anyone could post some suggestions that would be great! Thank you!
Replies:
Posted By: jayson33
Date Posted: November 04, 2008 at 1:29 AM
Your best bet would be to check out a few auto uphostery shop. Not to say you dont have the skills but would cheaper than you could buy the stuff to do it.
-------------
My wife thinks bagging a truck means you kick it in the truck nuts
Posted By: central99
Date Posted: November 04, 2008 at 7:39 AM
Hey man, I appreciate the response. Thanks.
|