first attempt at sub box
Printed From: the12volt.comForum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=108804
Printed Date: May 13, 2025 at 6:24 AM
Topic: first attempt at sub box
Posted By: hollowtek
Subject: first attempt at sub box
Date Posted: November 10, 2008 at 2:10 PM
i made this for a 88 crx. its my first time working with fiberglass. i didn't have a good area to work it but i think it turned out decent. also i have no experience painting, but it turned out pretty good. i followed velocity motors write up on how to make a fiberglas box. ill update more as i progress in my project :)
Replies:
Posted By: boogeyman
Date Posted: November 10, 2008 at 3:51 PM
Posted By: emptypockets426
Date Posted: November 10, 2008 at 4:14 PM
Posted By: ckeeler
Date Posted: November 10, 2008 at 4:20 PM
emptypockets426 wrote:
Holy crap...great job. Looks like a lil wet sanding needs to be done but other than that it looks great.
that and all the layers of matting to add to the inside so it'll be strong enough. but that part we cant see. we can just see the fist stage here, still not cured, and with out reinforcement on the inside yet. good shape so far. kinda looks like the same shape i did for an enclosure that had 1 15" and 2 10" woofers. seperate chambers but one enclosure.
