Print Page | Close Window

first time sub enclosure maker

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=110169
Printed Date: May 14, 2025 at 12:03 PM


Topic: first time sub enclosure maker

Posted By: ratster45
Subject: first time sub enclosure maker
Date Posted: December 29, 2008 at 11:22 PM

hey guys

heres my plans for a box

I plan to make a custom box for my TSW3004spl sub. my recomended cu.ft is 1.25.  I am goin for a Rectangle box 450mmX350mmX350mm and 1 inch thick. A couple of questions. 1) i want to mount them forward facing so am think of a clear plexiglass backing. how would i secure this. what materials would i use to seal it and hold it together. as i said this is my first attempt i may sound like a newb but as soon as i get suggestions i am away laughing.

2) would 1 inch thick plexiglass b thick enough for a sub of this quality?

3) would it need to be carpeted or could i jus cover it in the colour of the rest of my install




Replies:

Posted By: i am an idiot
Date Posted: December 30, 2008 at 6:12 AM
#1. A countersink bit and Drywall screws to mount the Plexi.
#2. Yes
#3. That is totally up to you.



Posted By: ratster45
Date Posted: December 30, 2008 at 4:50 PM
cheers bro just drill straight through the plexi bigger than the screw and secure it via the wood??


Print Page | Close Window