fiberglass enclosure for a crv 2008

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=110244
Printed Date: May 14, 2025 at 3:33 PM

Topic: fiberglass enclosure for a crv 2008

Posted By: jagdish
Subject: fiberglass enclosure for a crv 2008
Date Posted: January 01, 2009 at 9:43 PM

This is my first time building a fiberglass enclosure. I spent tonds of time researching the internet before I started to build it. It is cutom made for a crv 2008 and for 1 12" excelon subwoofer, 2 6x9 excelon speakers and 1 boss 3.5 farad capacitor. Please post any sugestions or coments!!

Replies:

Posted By: whiterob
Date Posted: January 04, 2009 at 3:02 AM

I suggest you read the sticky on this forum on how to make a fiberglass enclosure. There is another sticky on what materials you need. That should be able to get you started. Then you can ask questions as you go along.

Fiberglass enclosures are a lot of hard work. They take a lot of time and patience and can cost a lot if the project is complicated. In the end they are definetly worth the hard work though.

Just make sure you create a design you like. Take your time in setting up the fleece to the design you want. Don't forget to make the enclosure to the right internal volume and tuning frequency (if ported) for your sub. It would be a shame to spend all that time on the enclosure and have it sound horrible.

Posted By: airhed692005
Date Posted: January 16, 2009 at 2:50 AM

here is a center screen that I am making right now.
posted_image

-------------
Ronald Bailey Owner/ Installer of VIBRATION CUSTUM SOUNDS. CUSTOM BOX DESIGNER AND BUILDER
TID-896 7" screen,Amp-BX1206d
4/0power/ground cables
4-12 mofos 12ft3 box tuned 40hz DB:163.1

Posted By: airhed692005
Date Posted: January 16, 2009 at 2:52 AM

sorry did not work the first time. Got it

https://picasaweb.google.com/airhed692000/108CAMEA?authkey=K1zGoMPIL-Q#5291810468090713410

-------------
Ronald Bailey Owner/ Installer of VIBRATION CUSTUM SOUNDS. CUSTOM BOX DESIGNER AND BUILDER
TID-896 7" screen,Amp-BX1206d
4/0power/ground cables
4-12 mofos 12ft3 box tuned 40hz DB:163.1

Posted By: jf-fiber
Date Posted: January 16, 2009 at 6:40 AM

Hey that center screen looks nice...

how much time have you spent with that?

-------------
Fernando

Posted By: airhed692005
Date Posted: January 16, 2009 at 7:18 PM

will it took me to design about 6hours and to get where im at took me about 2-3 days/4-6 hour days

i need to get some lite weight body filler to make it smooth and do some sanding and the paint i will keep putting pictures as i get them done ok

-------------
Ronald Bailey Owner/ Installer of VIBRATION CUSTUM SOUNDS. CUSTOM BOX DESIGNER AND BUILDER
TID-896 7" screen,Amp-BX1206d
4/0power/ground cables
4-12 mofos 12ft3 box tuned 40hz DB:163.1