enclosure on the sparewheel, outside

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=110690
Printed Date: May 14, 2025 at 9:13 AM

Topic: enclosure on the sparewheel, outside

Posted By: mode--
Subject: enclosure on the sparewheel, outside
Date Posted: January 15, 2009 at 4:33 PM

oi there!
Greetings from Finland!
Next week I´m gonna start building my car, GroundZero style!
The car is a Opel Frontera ´96.
Coming up Ground Zero Plutonium and Nuclear stuff! Not sure how and what where yet, but will keep you all posted!

A cool thing I would like to try, is to fabricate a speaker-enclosure on the outside of the trunk, where the sparewheel should be.

This is my car, and the place would be to the right of the license-plate.

posted_image

What do you think? And HOW could I do it? I am used to Fiberglassing so that´s np.

thanks in advance

- dani

Replies:

Posted By: airhed692005
Date Posted: January 21, 2009 at 5:11 AM

OK that is weird but How many speakers,what kind and what size are you thanks on putting in the encloser? I got the design in the making for you just let me know ok.

-------------
Ronald Bailey Owner/ Installer of VIBRATION CUSTUM SOUNDS. CUSTOM BOX DESIGNER AND BUILDER
TID-896 7" screen,Amp-BX1206d
4/0power/ground cables
4-12 mofos 12ft3 box tuned 40hz DB:163.1

Posted By: holymr2
Date Posted: March 02, 2009 at 5:02 AM

That would be hot just make sure its in a good enclosure.

Posted By: jvsutton
Date Posted: March 10, 2009 at 1:59 PM

You could probably use a spare tire cover that is hard, like on a continental kit, an RV, or something like that for a mold. And just fab up a way to mount the enclosure you build to the factory part that the spare mounts to.