small enclosure ,wood or fibreglass

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=112439
Printed Date: May 13, 2025 at 10:34 PM

Topic: small enclosure ,wood or fibreglass

Posted By: justin lindhors
Subject: small enclosure ,wood or fibreglass
Date Posted: March 17, 2009 at 7:10 AM

car make ,nissan frontier crew cab le,i would like to fit 2 x rockford p8,under the rear seat,what would the best option be with limited space.
anyone done this before.thanks justin

Replies:

Posted By: davngr
Date Posted: March 18, 2009 at 4:35 AM

justin lindhors wrote:

car make ,nissan frontier crew cab le,i would like to fit 2 x rockford p8,under the rear seat,what would the best option be with limited space.
anyone done this before.thanks justin

if space is tight, i will usually make on side(top or bottom) of the box fiber glass at least.

depending on how confortable you are with fabrication. you can also make a frame out of wood and then wrap it in material as shown in the link below. good luck with your project

https://www.the12volt.com/installbay/forum_posts.asp~TID~74519~PN~1

-------------
life is a comedy to think, a tragedy to feel

Posted By: ca$ino
Date Posted: March 19, 2009 at 2:56 PM

i personally would go with wood...

much easier to fab, and easier to adjust/fix if problems should arise.

-------------
Look twice, think thrice, 1 splice/ 1 slice!
This is a phrase i came up with and something i will now live by.