want some opinions on center console

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=112840
Printed Date: May 04, 2024 at 4:42 AM

Topic: want some opinions on center console

Posted By: ca$ino
Subject: want some opinions on center console
Date Posted: April 01, 2009 at 10:20 AM

Hey fellas, ladies..

I'm about to start glassing my console (or should i say attempt) to start my center console, and would love some views, thoughts, opinions..etc..

posted_image

All i want is to be able to put at least (prefer both) but at least one 6x9 in the center... i'm putting 2 10's against back wall....

Should i glass box and center seperately or together?

Lemme know what you think

Caio! posted_image

-------------
Look twice, think thrice, 1 splice/ 1 slice!
This is a phrase i came up with and something i will now live by.

Replies:

Posted By: airhed692005
Date Posted: April 01, 2009 at 2:03 PM

Separately would make you life a lot easier putting it in the car. If you would like for me to design something just let me know. Have fun

-------------
Ronald Bailey Owner/ Installer of VIBRATION CUSTUM SOUNDS. CUSTOM BOX DESIGNER AND BUILDER
TID-896 7" screen,Amp-BX1206d
4/0power/ground cables
4-12 mofos 12ft3 box tuned 40hz DB:163.1

Posted By: ca$ino
Date Posted: April 01, 2009 at 2:25 PM

Hey airhead, i wouldn't a couple ideas, ya, go ahead, shoot... lemme see what you come up with. I have a general idea (sorta posted_image

) of what i want it to look like... but am COMPLETELY open for suggestions..

Here's some new pics...

posted_image

^^ This is called determination! posted_image

These are before and after dash gauge covers, i custom painted them..(i make custom inks, and paints)
posted_image

More to come folks! posted_image

-------------
Look twice, think thrice, 1 splice/ 1 slice!
This is a phrase i came up with and something i will now live by.

Posted By: ca$ino
Date Posted: April 01, 2009 at 3:50 PM

me cutting acrylic for speaker rings for dash

got a pm about a closer pic of gauge inserts...
posted_image

-------------
Look twice, think thrice, 1 splice/ 1 slice!
This is a phrase i came up with and something i will now live by.

Posted By: ca$ino
Date Posted: April 09, 2009 at 1:59 PM

After FINALLY begin able to get and put in my new bucket seats, i can finally start mapping out my center console...here goes!

-------------
Look twice, think thrice, 1 splice/ 1 slice!
This is a phrase i came up with and something i will now live by.