winisd, any feedback?

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=113420
Printed Date: May 06, 2025 at 4:21 PM

Topic: winisd, any feedback?

Posted By: mdoffroad
Subject: winisd, any feedback?
Date Posted: April 26, 2009 at 12:26 PM

I've been working out various enclosure sizes and specs with a program I've had around for a few years, WinISDPro, has anyone else used this?? It hasn't let me down so far but was wondering if there is something easier to use (if thats even possible) or a simpler interface....I appreciate the help...

IF it makes a difference,most of what I do is vented enclosures with it..

-------------
Matt

Replies:

Posted By: stevdart
Date Posted: April 26, 2009 at 10:22 PM

Try Unibox. You might find it more suitable to your tastes. But as for WinISD Pro, I have a tutorial in the hot topics forum that might give you some insight on how to understand the program better. It shouldn't be considered "hard".

-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

Posted By: mdoffroad
Date Posted: April 26, 2009 at 10:38 PM

Didn't persay mean it was extremly difficult to use, but was looking for a more optimized program for sound curve optimization etc.... I'll look the other up,thanks!

-------------
Matt

Posted By: stevdart
Date Posted: April 26, 2009 at 10:51 PM

https://home20.inet.tele.dk/kou/ubdwnld.html

https://www.rjbaudio.com/Audiofiles/FRDtools.html

-------------
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

Print Page | Close Window