how do i measure cubic ft.?

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=114048
Printed Date: May 13, 2025 at 10:56 PM

Topic: how do i measure cubic ft.?

Posted By: joeeeeker
Subject: how do i measure cubic ft.?
Date Posted: May 27, 2009 at 2:39 AM

my friend and i are planning to make me a fiberglass stealthbox for my IS250, and i wanted to have about 1.0-1.1 cubic ft. of space in the enclosure, how do i measure or produce 1.0 cubic ft. of space? i was told you could tell how much by using water and converting the volume of water into cubic ft., but the issue is, the water expanding/molding the wood ring. i was considering using sand? would appreciate anyones input.

Replies:

Posted By: i am an idiot
Date Posted: May 27, 2009 at 7:02 AM

Shipping peanuts. Or for a more accurate measurement, pellets out of a bean bag chair.

Posted By: joeeeeker
Date Posted: May 27, 2009 at 12:30 PM

thanks craig! you always got the solution :P

Posted By: i am an idiot
Date Posted: May 27, 2009 at 1:20 PM

No problem, I didn't even notice that it was you asking. What ever happened with the 300/4? Did you buy it?

Print Page | Close Window