how do i get perfect curve lines?

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116293
Printed Date: May 16, 2024 at 4:01 AM

Topic: how do i get perfect curve lines?

Posted By: stevematt18
Subject: how do i get perfect curve lines?
Date Posted: September 13, 2009 at 9:35 AM

Hey i was wondering how do you get perfect curved lines for your frame in your mdf like this...

posted_image

and all those panels. espically the center piece how do you make that perfect?

Replies:

Posted By: deeg money
Date Posted: September 13, 2009 at 1:29 PM

lots of hard work and tinkering... lol I sent you a pm for the question you asked. Hope it helps

-------------
Deeg money
"If you cant be good, be good at it"

Posted By: rojadoja
Date Posted: September 14, 2009 at 7:16 PM

Get creative with objects around the shop, if you have a router, you can tackle just about anything. 3M makes some cheap flexible rubber moulding that has a peel-n-stick side that you can use to lay out a guide for you to follow. If you just take a look around you will find so many guides like these that will give you uniform, semetrical (or not), circles, curves, odd shapes, etc that will make life so easy for you.

Print Page | Close Window