Print Page | Close Window

subs mounted differently in ported box

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=116514
Printed Date: May 15, 2024 at 4:15 AM


Topic: subs mounted differently in ported box

Posted By: shije
Subject: subs mounted differently in ported box
Date Posted: September 24, 2009 at 12:16 AM

will a box built to fit 4 12" subs with a single port in the center run properly without cutting each other out... meaning 2 subs will be mounted on the top of the box and the other 2 will be on the front of the box along with the port in the middle...i have seen a bandpass box built with 2 subs back to back and was just wondering if it will work the way i was wondering

-------------
BLT



Replies:

Posted By: blackcivichatch
Date Posted: September 25, 2009 at 11:20 AM
As long as you got all the subs wired in phase you should be good.

-------------
UNLABELED Custom Car Club President


Print Page | Close Window