any source for abs perforated grille?

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=117679
Printed Date: May 11, 2025 at 2:38 AM

Topic: any source for abs perforated grille?

Posted By: 88transamfreak
Subject: any source for abs perforated grille?
Date Posted: November 12, 2009 at 3:53 PM

I know select products sells abs plastic that is perforated for forming speaker grills and was wondering if there was a cheaper better source?

I want to form my own "grills" for my kick panels similar to the ones supplied with Q-logic kicks.

-------------
1976 Camaro
1982 Corvette

Replies:

Posted By: 88transamfreak
Date Posted: November 13, 2009 at 7:39 AM

nobody in the car audio industry has used this stuff before? It's the abs mesh plastic over this speaker in this q-logic panel...

Please help!

posted_image

-------------
1976 Camaro
1982 Corvette

Posted By: squires500
Date Posted: November 13, 2009 at 8:42 AM

ive never done it with plastic but a preforated aluminum it is possible.
the aluminum is available in lots of places i get mine from a local screen door manufacturer.

you then get mdf and cut a inner circle that is width of the speaker and is completely full and two outer rings slightly bigger and thinner then compress the aluminum between the two mdf rings by screwing them tight together ever 2cm or so the idea is its stuck hard . then using a press like a 10ton hydrolic ram or a truck you can lower onto it with a jack maybe a car or worst case smack it with a sledgehammer may work. and you place the full inner ring inbetween the others so when you crush it it forces the aluminum to draw around the mdf rings will give you this effect :). the hardest part is finding a way of mounting it.