custom enclosure idea

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=120606
Printed Date: May 12, 2025 at 3:51 PM

Topic: custom enclosure idea

Posted By: lokkitn
Subject: custom enclosure idea
Date Posted: March 09, 2010 at 10:04 AM

I have a 2003 GMC Sierra Extended Cab.

I am wanting to build a box that imitates the back seat - the box is meant to house 3 15" Elemental Design (Black cone with Blue E). I want the box to basically be the back seat ( this includes seat cushion and back support with head rest.)

I built a box that housed these same 15's in an 92 extended cab S-10 - so i know i could completely lose my back seat to get them in.

I am willing to only use 2 in the set up if it is necessary. Any input is greatly appreciated.

Replies:

Posted By: Melted Fabric
Date Posted: March 09, 2010 at 5:32 PM

Three 15s will require a lot of space needed to vibrate that air.

Any reference photos to show what you are working with?

-------------
I have not failed. I've just found 10,000 ways that won't work.

When you do not know what you are doing and what you are doing is the best -- that is inspiration.

Posted By: nismo542
Date Posted: June 06, 2010 at 1:39 AM

any progress on the install? i did this a while back for a friend using 4 12s