first time to fiberglass

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=124713
Printed Date: May 05, 2025 at 1:25 PM

Topic: first time to fiberglass

Posted By: tylerseefe
Subject: first time to fiberglass
Date Posted: November 28, 2010 at 9:23 PM

i am making custom kick panels for my dodge dokata and i have the shape made out of mdf and i know that i am suppose to stretch fleece over it and staple it but after that i am confused do i just put resin or do i put resin and hardner with it or do i put fiberglass mat with it? please help any help with be greatly appreciated

Replies:

Posted By: agraves1
Date Posted: November 30, 2010 at 7:09 PM

I haven't fiberglassed all that much, but I believe you go over the fleece with your resin/hardener mix. Then after that you add your layers of mat.

The first time I tried it I searched "how to fiberglass" on a search engine and it came up with many step by step how to's...

-------------
MECP Advanced
Make your life easier and buy a DMM.

Posted By: z03mz03m
Date Posted: December 11, 2010 at 1:01 AM

Read the can of your resin and see how many drops of hardener to mix in compared to the amount of resin. I recommend using a plastic measuring cup that you can get at any hardware store near the paint section. Then apply resin to the fleece and let it harden. then apply several layers of fiberglass saturating each layer with resin.

Before you do that i believe you should read this. posted_image

Then watch this. posted_image

Print Page | Close Window