Print Page | Close Window

fiberglass

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=12485
Printed Date: November 03, 2025 at 11:34 PM


Topic: fiberglass

Posted By: m_berrow
Subject: fiberglass
Date Posted: April 20, 2003 at 11:13 PM

i built a box and console out of 3/4 mdf and wanted to know what i would need to do in order to paint the box and console. Can i use feather fill over the whole box or do i need to glass it first?




Replies:

Posted By: audiomechanic
Date Posted: April 21, 2003 at 5:36 AM
you can use feather fill. just go thru and spray a few medium coats on it. the first coat will soak in the mdf. the second will sit on top pretty well.

then go thru and sand it with 80 grit if there are any runs. if not you can start with 120 or maybe even 220.
sand it to 320 and shoot a coat of sealer primer over the top. this will give you a uniform color under the base coat. you can spray on the sealer primer pretty light. sand with a 400 grit and maybe a 600 grit.
then shoot your paint. if you are gonna spray it in a place where there might be a lot of dust in it, wipe it down with a tack cloth in between the base coat and just before you apply the clear.

-------------



Posted By: m_berrow
Date Posted: April 21, 2003 at 6:30 AM

thanks alot bud!


Print Page | Close Window