Print Page | Close Window

2010 silverado door panels

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=126182
Printed Date: May 11, 2025 at 7:24 PM


Topic: 2010 silverado door panels

Posted By: spektrum
Subject: 2010 silverado door panels
Date Posted: February 16, 2011 at 7:17 PM

I'm wanting to replace the oem speakers in my front doors.  I'm afraid of tearing up the door panels trying to remove them.  Does anyone have any information on removing the panels on the new body style Chevy trucks?  I've done a search but haven't found anything.   It probably doesn't make any difference,  but it's an extended cab model.   Thanks.




Replies:

Posted By: i am an idiot
Date Posted: February 16, 2011 at 9:34 PM
I do not have any valuable info about removing the panel, but I can tell you that it is an easy vehicle to do.  My installers fight over who is going to get to do them when they come in.  I can also tell you that you will have to build a plate to mount them.  If nobody helps you before the morning, I will get some info for you.



Posted By: spektrum
Date Posted: February 16, 2011 at 9:48 PM
Glad to hear that it is an easy job.  I'd appreciate any info on how to do it.  I thought that 6 1/2" speakers would bolt right in.  Apparently not...   Thanks for the reply! 



Posted By: spektrum
Date Posted: February 17, 2011 at 8:34 PM
Got the panels off without any problems.  Thanks anyway.


Print Page | Close Window