Print Page | Close Window

2007 tahoe kick panels qlogic mmats comps

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128981
Printed Date: May 02, 2025 at 12:26 PM


Topic: 2007 tahoe kick panels qlogic mmats comps

Posted By: integra9023
Subject: 2007 tahoe kick panels qlogic mmats comps
Date Posted: October 26, 2011 at 10:26 PM

Hey guys doing an install on a 2007 Tahoe. I am using MMats Pro Series 2-way 6.5 all the way around (2 sets). I ordered a set of Q Logic Kick Panels but am concerned about the structural integrity of them. Is there a better way to seal them or a material to coat them? Can I sound deaden the inside? Will I be find installing the rear set in the doors or is there a better solution? I am powering them with a MMats 4100 amplifier. Thanks for the help in advance!

Robert, GP Customs



Replies:

Posted By: tonanzith
Date Posted: November 24, 2011 at 1:37 AM
The integrity should be fine but you could always line the inside with dynamat.

-------------
Gary Sather




Print Page | Close Window