best way to fill in parts of dash bezel?

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=131023
Printed Date: May 02, 2025 at 10:33 PM

Topic: best way to fill in parts of dash bezel?

Posted By: jpinusmc
Subject: best way to fill in parts of dash bezel?
Date Posted: March 25, 2012 at 2:59 AM

Looking to fit a double-din deck into this single din bezel. I will be cutting upwards into the section of holes right below the heater vents. My questions are:

What is the best material to fill in the holes and make the bezel complete?

Should I fill in the holes first and then make the cutout for the deck or should I make the cutout and then fill in whats left?

posted_image

Replies:

Posted By: tonanzith
Date Posted: March 31, 2012 at 12:47 PM

Fill it with bondo, sand it smooth and hit it with some good textured paint.

-------------
Gary Sather

Posted By: itsyuk
Date Posted: March 31, 2012 at 1:17 PM

since you didnt post what year your car is i have to ask......

did they make a factory version of the same console with a double din a year or 2 later that has parts to convert yours to the later style?

-------------
yuk
quiet rural missouri, near KC.
If your system moves you physically and not emotionally, you have wasted your money.

Print Page | Close Window