custom fog lights
Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133508
Printed Date: April 25, 2024 at 10:09 PM
Topic: custom fog lights
Posted By: jem_usmc
Subject: custom fog lights
Date Posted: February 03, 2013 at 11:41 AM
I am thinking of making a set of custom fog lights for a 2012 evo im working on. I've worked with plexiglass before but in this situation I dont think it would be a good material to use due to it being kinda soft. What would be a good plastic that is easy to work with and can be carved and polished? Or would it be better to use a clear resin and pour it into a mold? Does anyone have any kind of experiance with something like this?
Replies:
Posted By: z03mz03m
Date Posted: April 05, 2013 at 3:08 PM
Polycarbonate is what i perfer over plexiglass because it doesnt crack and is much easier to machine.
-------------
Dodge Magnum in progress:
Pioneer DEH-80PRS - PPI Amps - Dayton Subwoofer(s) - Exodus Anarchy's - Vifa Tweeters - Kinetik Battery
|