Print Page | Close Window

design software

Printed From: the12volt.com
Forum Name: Fiberglass, Fabrication, and Interiors
Forum Discription: Fiberglass Kick Panels, Subwoofer Enclosures, Plexiglas, Fabrics, Materials, Finishes, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=133926
Printed Date: May 03, 2025 at 1:06 AM


Topic: design software

Posted By: IrishDoc
Subject: design software
Date Posted: March 25, 2013 at 4:18 PM

Does anyone know of design software that will allow a box to be designed complete with fiberglass areas and be able to measure the cubic feet of the enclosure? I want to get my box as close as possible to the sub specs.

-------------
Just A Hobby Installer



Replies:

Posted By: DYohn
Date Posted: March 30, 2013 at 9:40 AM
To be accurate you'll need CAD software. You can try Google Sketchup, which is free and pretty good. It takes a little practice to learn to use it.

https://www.sketchup.com/intl/en/

-------------
Support the12volt.com


Print Page | Close Window